Qemu Command : qemu-system-hppa -kernel kernel.img -initrd rootfs.img -nographic -serial pipe:guest_pipe -no-reboot
Qemu Version : QEMU emulator version 8.1.2
Copyright (c) 2003-2023 Fabrice Bellard and the QEMU Project developers


SeaBIOS PA-RISC Firmware Version 8 (QEMU 8.1.2)



Duplex Console IO Dependent Code (IODC) revision 1



------------------------------------------------------------------------------

  (c) Copyright 2017-2023 Helge Deller  and SeaBIOS developers.

------------------------------------------------------------------------------



  Processor   Speed            State           Coprocessor State  Cache Size

  ---------  --------   ---------------------  -----------------  ----------

      0      250 MHz    Active                 Functional            0 KB





  Available memory:     512 MB

  Good memory required: 16 MB



  Primary boot path:    FWSCSI.0.0

  Alternate boot path:  FWSCSI.2.0

  Console path:         SERIAL_1.9600.8.none

  Keyboard path:        SERIAL_1.9600.8.none



Autobooting Linux kernel which was loaded by qemu...



[    0.000000] Linux version 6.5.10-32bit (ramin@ramin-pc) (hppa-openadk-linux-uclibc-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.41) #1 SMP Wed Nov  8 16:48:30 CET 2023


[    0.000000] FP[0] enabled: Rev 1 Model 19


[    0.000000] The 32-bit Kernel has started...


[    0.000000] Kernel default page size is 4 KB. Huge pages disabled.


[    0.000000] Determining PDC firmware type: System Map.


[    0.000000] model 00005020 00000481 00000000 02020202 7794d7fe 100000f0 00000004 000000ba 000000ba


[    0.000000] vers  00000023


[    0.000000] CPUID vers 15 rev 8 (0x000001e8)


[    0.000000] capabilities 0x2


[    0.000000] HP-UX model name: 9000/778/B160L


[    0.000000] MPE/iX model name: 9000/778/B160L


[    0.000000] Memory Ranges:


[    0.000000]  0) Start 0x0000000000000000 End 0x000000001fffffff Size    512 MB


[    0.000000] Total Memory: 512 MB


[    0.000000] initrd: 2ef71000-2ffefe00


[    0.000000] initrd: reserving 1ef71000-1ffefe00 (mem_max 20000000)


[    0.000000] PDT: Firmware does not provide any page deallocation information.


[    0.000000] Zone ranges:


[    0.000000]   Normal   [mem 0x0000000000000000-0x000001ffffffffff]


[    0.000000] Movable zone start for each node


[    0.000000] Early memory node ranges


[    0.000000]   node   0: [mem 0x0000000000000000-0x000000001fffffff]


[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff]


[    0.000000] PDC reported no LCD or LED.


[    0.000000] percpu: Embedded 23 pages/cpu s62832 r8192 d23184 u94208


[    0.000000] SMP: bootstrap CPU ID is 0


[    0.000000] Kernel command line:  console=ttyS0 earlycon=pdc


[    0.000000] earlycon: pdc0 at MMIO32be 0x00000000 (options '')


[    0.000000] printk: bootconsole [pdc0] enabled


[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes


[    0.000000] printk: log_buf_len total cpu_extra contributions: 61440 bytes


[    0.000000] printk: log_buf_len min size: 65536 bytes


[    0.000000] printk: log_buf_len: 131072 bytes


[    0.000000] printk: early log buf free: 63752(97%)


[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)


[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)


[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 130048


[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off


[    0.000000] Memory: 489196K/524288K available (7628K kernel code, 878K rwdata, 1724K rodata, 536K init, 396K bss, 35092K reserved, 0K cma-reserved)


[    0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=16, Nodes=1


[    0.000000] rcu: Hierarchical RCU implementation.


[    0.000000] rcu: 	RCU event tracing is enabled.


[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.


[    0.000000] NR_IRQS: 96


[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.


[    0.000182] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps every 8589934590ns


[    0.006264] Console: colour dummy device 128x48


[    0.008398] Calibrating delay loop... 1603.99 BogoMIPS (lpj=8019968)


[    0.228711] pid_max: default: 32768 minimum: 301


[    0.233442] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)


[    0.233986] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)


[    0.275854] TOC handler registered


[    0.278610] rcu: Hierarchical SRCU implementation.


[    0.278898] rcu: 	Max phase no-delay instances is 1000.


[    0.291034] smp: Bringing up secondary CPUs ...


[    0.292176] smp: Brought up 1 node, 1 CPU


[    0.310876] devtmpfs: initialized


[    0.321490] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns


[    0.322598] futex hash table entries: 4096 (order: 5, 196608 bytes, linear)


[    0.334993] NET: Registered PF_NETLINK/PF_ROUTE protocol family


[    0.345356] EISA bus registered


[    0.346486] Searching for devices...


[    0.353616] Found devices:


[    0.353987] 1. Phantom PseudoBC GSC+ Port [8] at 0xffc00000 { type:7, hv:0x504, sv:0x0, rev:0x0 }


[    0.354359] 2. Dino PCI Bridge [8:0] at 0xfff80000 { type:13, hv:0x680, sv:0xa, rev:0x3 }


[    0.354651] 3. Merlin+ 132 Dino RS-232 [8:0:63] at 0xfff83000 { type:10, hv:0x22, sv:0x8c, rev:0x0 }


[    0.354958] 4. Merlin 160 Core BA [8:16] at 0xffd00000 { type:11, hv:0x3d, sv:0x81, rev:0x0 }, additional addresses: 0xffd0c000 0xffc00000 


[    0.355427] 5. Merlin 160 Core RS-232 [8:16:4] at 0xffd05000 { type:10, hv:0x3d, sv:0x8c, rev:0x0 }


[    0.355724] 6. Merlin 160 Core Centronics [8:16:0] at 0xffd02000 { type:10, hv:0x3d, sv:0x74, rev:0x0 }, additional addresses: 0xffd01000 0xffd03000 


[    0.356148] 7. Merlin L2 160 (9000/778/B160L) [48] at 0xfffb0000 { type:0, hv:0x502, sv:0x4, rev:0x0 }


[    0.359450] CPU0: cpu core 0 of socket 0


[    0.360599] CPU(s): 1 out of 1 PA7300LC (PCX-L2) at 250.000000 MHz online


[    0.366703] alternatives: applied 3733 out of 3742 patches


[    0.367301] alternatives: optimizing cache-flushes.


[    0.368616] Calculated flush threshold is 10872 KiB


[    0.368891] Cache flush threshold set to 0 KiB


[    0.370482] Whole TLB flush 25638 cycles, Range flush 10883072 bytes 306967 cycles


[    0.371083] Calculated TLB flush threshold 16 KiB


[    0.371293] TLB flush threshold set to 16 KiB


[    0.372835] Lasi version 0 at 0xffd00000 found.


[    0.375352] Dino version 3.1 found at 0xfff80000


[    0.379580] dino 8:0: PCI host bridge to bus 0000:00


[    0.380247] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]


[    0.380878] pci_bus 0000:00: root bus resource [mem 0xf0800000-0xff7fffff]


[    0.381363] pci_bus 0000:00: root bus resource [bus 00-ff]


[    0.383740] pci 0000:00:00.0: [1000:0012] type 00 class 0x010000


[    0.385765] pci 0000:00:00.0: reg 0x10: [io  0x1000-0x10ff]


[    0.387372] pci 0000:00:00.0: reg 0x14: [mem 0xff7fe000-0xff7fe3ff]


[    0.388224] pci 0000:00:00.0: reg 0x18: [mem 0xff7fc000-0xff7fdfff]


[    0.396025] pci 0000:00:01.0: [1011:0019] type 00 class 0x020000


[    0.396753] pci 0000:00:01.0: reg 0x10: [io  0x1100-0x117f]


[    0.398626] pci 0000:00:01.0: reg 0x14: [mem 0xff7ff000-0xff7ff07f]


[    0.403190] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00


[    0.404695] pci 0000:00:00.0: BAR 2: assigned [mem 0xf0800000-0xf0801fff]


[    0.406485] pci 0000:00:00.0: BAR 1: assigned [mem 0xf0802000-0xf08023ff]


[    0.406943] pci 0000:00:00.0: BAR 0: assigned [io  0x0100-0x01ff]


[    0.407458] pci 0000:00:01.0: BAR 0: assigned [io  0x0080-0x00ff]


[    0.407924] pci 0000:00:01.0: BAR 1: assigned [mem 0xf0803000-0xf080307f]


[    0.410447] powersw: Soft power switch at 0xf07ffff0 enabled.


[    0.434364] iommu: Default domain type: Translated


[    0.434692] iommu: DMA domain TLB invalidation policy: strict mode


[    0.439280] SCSI subsystem initialized


[    0.443647] usbcore: registered new interface driver usbfs


[    0.444488] usbcore: registered new interface driver hub


[    0.445093] usbcore: registered new device driver usb


[    0.446383] pps_core: LinuxPPS API ver. 1 registered


[    0.446632] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 


[    0.447095] PTP clock support registered


[    0.465155] vgaarb: loaded


[    0.469680] VFS: Disk quotas dquot_6.6.0


[    0.470514] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)


[    0.531221] NET: Registered PF_INET protocol family


[    0.534083] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)


[    0.543101] tcp_listen_portaddr_hash hash table entries: 256 (order: 1, 8192 bytes, linear)


[    0.543808] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)


[    0.544253] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)


[    0.544765] TCP bind hash table entries: 4096 (order: 6, 262144 bytes, linear)


[    0.545970] TCP: Hash tables configured (established 4096 bind 4096)


[    0.549228] UDP hash table entries: 256 (order: 2, 20480 bytes, linear)


[    0.550121] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes, linear)


[    0.553025] NET: Registered PF_UNIX/PF_LOCAL protocol family


[    0.553899] PCI: CLS 16 bytes


[    0.555666] clocksource: cr16: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041786 ns


[    0.556703] Trying to unpack rootfs image as initramfs...


[    0.589596] clocksource: Switched to clocksource cr16


[    0.591545] Enabling PDC chassis warnings support v0.05


[    0.610829] workingset: timestamp_bits=30 max_order=17 bucket_order=0


[    0.622117] io scheduler mq-deadline registered


[    0.622593] io scheduler kyber registered


[    0.643909] PDC Stable Storage facility v0.30


[    0.646039] sticore: STI GSC/PCI core graphics driver Version 0.9c


[    0.819983] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled


[    0.851722] printk: console [ttyS0] disabled


[    0.877143] 8:16:4: ttyS0 at MMIO 0xffd05800 (irq = 16, base_baud = 454545) is a 16550A


[    0.879096] printk: console [ttyS0] enabled
[    0.879096] printk: console [ttyS0] enabled


[    0.879778] printk: bootconsole [pdc0] disabled
[    0.879778] printk: bootconsole [pdc0] disabled


[    0.949150] 8:0:63: ttyS1 at MMIO 0xfff83800 (irq = 18, base_baud = 454545) is a 16550A
[    0.982290] parport_init_chip: initialize bidirectional-mode
[    0.983601] parport0: PC-style at 0xffd02800, irq 17 [PCSPP,TRISTATE]
[    1.272719] brd: module loaded
[    1.393189] loop: module loaded
[    1.395824] sym53c8xx 0000:00:00.0: enabling SERR and PARITY (0107 -> 0147)
[    1.399728] sym0: <895a> rev 0x0 at pci 0000:00:00.0 irq 19
[    1.416530] sym0: PA-RISC Firmware, ID 7, Fast-40, LVD, parity checking
[    1.427253] sym0: SCSI BUS has been reset.
[    1.427702] scsi host0: sym-2.2.3
[    1.702664] Freeing initrd memory: 16888K
[    4.591586] scsi 0:0:2:0: CD-ROM            QEMU     QEMU CD-ROM      2.5+ PQ: 0 ANSI: 5
[    4.592935] scsi target0:0:2: tagged command queuing enabled, command queue depth 16.
[    4.594495] scsi target0:0:2: Beginning Domain Validation
[    4.598763] scsi target0:0:2: Domain Validation skipping write tests
[    4.599252] scsi target0:0:2: Ending Domain Validation
[    4.623904] st: Version 20160209, fixed bufsize 32768, s/g segs 256
[    4.628369] sr 0:0:2:0: Power-on or device reset occurred
[    4.631086] sr 0:0:2:0: [sr0] scsi3-mmc drive: 16x/50x cd/rw xa/form2 cdda tray
[    4.631623] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.651279] sr 0:0:2:0: Attached scsi generic sg0 type 5
[    4.654888] tulip 0000:00:01.0: enabling SERR and PARITY (0103 -> 0143)
[    4.669503] tulip0: EEPROM default media type Autosense
[    4.670038] tulip0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block
[    4.673885] tulip0:  MII transceiver #1 config 3100 status 702c advertising 0501
[    4.690759] net eth0: Digital DS21142/43 Tulip rev 0 at Port 0x80, 52:54:00:12:34:56, IRQ 20
[    4.692488] LASI 82596 driver - Revision: 1.30
[    4.698080] HP SDC: No SDC found.
[    4.705050] rtc-generic rtc-generic: registered as rtc0
[    4.706244] rtc-generic rtc-generic: setting system clock to 2023-12-02T13:26:38 UTC (1701523598)
[    4.708066] device-mapper: uevent: version 1.0.3
[    4.711374] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    4.713158] hid: raw HID events driver (C) Jiri Kosina
[    4.717696] usbcore: registered new interface driver usbhid
[    4.718131] usbhid: USB HID core driver
[    4.721536] NET: Registered PF_INET6 protocol family
[    4.738867] Segment Routing with IPv6
[    4.740022] In-situ OAM (IOAM) with IPv6
[    4.741215] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    4.748787] NET: Registered PF_PACKET protocol family
[    4.844501] Freeing unused kernel image (initmem) memory: 536K
[    4.846754] Write protected read-only-after-init data: 2k
[    4.847387] Run /init as init process
[    4.856858] process '/bin/busybox' started with executable stack
test console
test ttyS0
Disabled Tests :export NO_DL=1 NO_MATH=1 NO_THREADS=1 NO_TLS=1 NO_LOCALE=1 NO_NPTL=1 
-------------------- tests_start ------------------------
PASS argp-ex1
PASS arg_test
PASS argp-ex2
PASS assert
PASS argp-ex3
PASS argp-ex4
PASS argp-test
PASS bug-argp1
PASS tst-argp1
PASS tst-argp2
PASS crypt
PASS md5c-test
PASS sha256c-test
PASS sha512c-test
PASS ctype
SKIP tst-iconv1
SKIP tst-iconv2
SKIP tst-iconv3
SKIP tst-iconv4
SKIP tst-iconv5
SKIP tst-iconv6
PASS bug-if1
PASS gethost
PASS gethost_r-align
PASS gethostid
PASS getnetent
PASS if_nameindex
PASS tst-aton
PASS tst-ether_aton
PASS tst-ethers-line
PASS tst-ethers
PASS tst-getni1
PASS tst-getni2
PASS tst-ifaddrs
PASS tst-network
PASS tst-ntoa
PASS tst-res
PASS tst2_mbrtowc
PASS tst-sock-nonblock
PASS tst_iswalnum
PASS tst_iswalpha
PASS tst_iswcntrl
PASS tst_iswctype
PASS tst_iswdigit
PASS tst_iswgraph
PASS tst_iswlower
PASS tst_iswprint
PASS tst_iswpunct
PASS tst_iswspace
PASS tst_iswupper
PASS tst_iswxdigit
PASS tst_mblen
PASS tst_mbrlen
PASS tst_mbrtowc
PASS tst_mbsrtowcs
PASS tst_mbstowcs
PASS tst_mbtowc
PASS tst_strcoll
PASS tst_strxfrm
PASS tst_towctrans
PASS tst_towlower
PASS tst_towupper
PASS tst_wcrtomb
PASS tst_wcscat
PASS tst_wcschr
PASS tst_wcscmp
PASS tst_wcscoll
PASS tst_wcscpy
PASS tst_wcscspn
PASS tst_wcslen
PASS tst_wcsncat
PASS tst_wcsncmp
PASS tst_wcsncpy
PASS tst_wcspbrk
PASS tst_wcsrtombs
PASS tst_wcsspn
PASS tst_wcsstr
PASS tst_wcstok
PASS tst_wcstombs
PASS tst_wcswidth
PASS tst_wcsxfrm
PASS tst_wctob
PASS tst_wctomb
PASS tst_wctrans
PASS tst_wctype
PASS tst_wcwidth
PASS malloc-standard-alignment
PASS malloc
PASS mallocbug
PASS realloc-can-shrink
PASS realloc0
PASS testmalloc
PASS tst-calloc
PASS tst-malloc
PASS tst-mallocfork
PASS tst-mcheck
PASS tst-valloc
PASS bug-glob2
PASS bug-readdir1
PASS dirent
PASS dirent64
PASS fdopen
PASS opendir-tst1
PASS popen
PASS seek
FAIL sem got 1 expected 0
	semctl IPC_STAT failed: Invalid argument
	semget(IPC_CREAT) = 0
	semctl(k) = -1
PASS stdarg
PASS tst-hasmntopt
FAIL tst-inotify got 1 expected 0
	inotify_init1(): Invalid argument
	inotify_add_watch(): Bad file descriptor
	first read() returned -1
	second read() returned -1
	incorrect event mask: 0
PASS tst-mkostemps
PASS tst-nftw
PASS tst-preadvwritev
PASS tst-rlimit
PASS tst-rlimit64
PASS tst-scandir
PASS tst-seekdir
PASS tst-statfs
PASS tst-statvfs
PASS tst-syscall0
PASS tst-syscall1
PASS tst-syscall6
PASS tst-utmp
PASS tst-utmpx
PASS mmap
PASS mmap2
PASS mmap64
PASS tst-mmap-eofsync
PASS tst-mmap-fflushsync
PASS tst-mmap-offend
PASS tst-mmap-setvbuf
PASS getgroups
PASS grcat
PASS pwcat
PASS test_grp
PASS test_pwd
PASS tst-regex2
SKIP tst-regexloc
PASS getrpcent
PASS tst-posix_spawn
PASS bug269-setjmp
PASS jmpbug
PASS sigjmpbug
PASS tst-setjmp
PASS tst-vfork-longjmp
PASS sigchld
PASS signal
PASS tst-raise
PASS tst-signal
PASS hello
FAIL tst-signalfd got 1 expected 0
	signalfd() failed: Invalid argument
	./tst-signalfd: first read() returned -1
	./tst-signalfd: second read() returned -1
	./tst-signalfd: ssi contains bogus signo
PASS tst-sigset
PASS tiny
PASS memcmp-stat
PASS stat-loop256
PASS stat
PASS 64bit
PASS fclose-loop
PASS lseek_no_lfs
PASS scanf_m
PASS qsort
PASS test-canon
PASS test-canon2
PASS test-mkostemp-O_CLOEXEC
PASS test-mkostemp-child
PASS testatexit
PASS teston_exit
PASS teststrtol
PASS teststrtoq
PASS bug-strcoll1
PASS bug-strncat1
PASS bug-strpbrk1
PASS bug-strspn1
PASS stratcliff
PASS test-ffs
PASS testcopy
PASS tester
PASS tst-bswap
PASS termios
PASS tst-inlcall
PASS tst-memmove
PASS tst-strlen
PASS tst-strtok
PASS tst-strxfrm
PASS clocktest
PASS test_time
PASS tst-ctime
PASS tst-futimens1
PASS clone
PASS errno
PASS tst-mktime
PASS tst-mktime3
PASS exec-null
PASS tst-strptime2
PASS fork
FAIL tst-timerfd got 1 expected 0
	timerfd() failed: Invalid argument
	./tst-timerfd: first read() returned -1
	./tst-timerfd: second read() returned -1
	./tst-timerfd: wrong number of expirations: 0
PASS getcwd
PASS getopt
PASS getopt_long
PASS tst-fallocate
PASS tst-getcwd
PASS tst-posix_fallocate
PASS tst-preadwrite
PASS tst-preadwrite64
PASS tst-pselect
PASS tstgetopt
PASS vfork
Total skipped: 7
Total failed: 4
Total passed: 195